GEARWRENCH Work Table vs WORX Pegasus: Which Folds Better? (November 2026)

On this page (10 sections)

1. GEARWRENCH work table vs WORX Pegasus: how the two tables compare side by side
2. Which table stores better in a shared garage?
3. Which table is more stable under real projects?
4. Which table adjusts to the work you do?
5. Which table moves around the garage more easily?
6. Which table suits small projects and repairs?
7. Which table suits cutting and woodworking?
8. Which table costs more to set up and keep?
9. Who should buy which table?
10. Verdict: which folding work table should you buy?

The WORX Pegasus wins the folding contest, with a 30 lb frame that folds into a compact bundle you can carry under one arm. In this GEARWRENCH work table vs WORX Pegasus comparison, the folding table we stack against the Pegasus here is the GEARWRENCH adjustable height mobile work table.

That difference matters if your garage shares space with parked cars. A table that folds small and goes on a shelf keeps the floor clear, while a rolling table that stays set up needs a permanent home.

This comparison weighs storage against adjustability. The GEARWRENCH Adjustable Height Mobile Work Table 35 wins overall for height flexibility, while the WORX Pegasus WX051 is the folding pick for tight garages.

Both are solid choices, and the right one depends on how you use the space.

GEARWRENCH work table vs WORX Pegasus: how the two tables compare side by side

The Pegasus folds and carries like a tool bag, while the GEARWRENCH table rolls on casters and stays ready to use. The table below lines up the specs that decide storage, mobility and support.

The size gap runs both ways. The Pegasus offers more surface, at 31 x 25 inches against the GEARWRENCH 20 x 30 inch tray.

The GEARWRENCH table stands taller at its top setting and lower at its bottom, while the Pegasus holds a steady 32 inches.

If storage is your main concern, the folding question mostly answers itself. The Pegasus closes into a small package.

The GEARWRENCH table is a mobile unit with casters, so it stays assembled and rolls wherever you park it.

Which table stores better in a shared garage?

The Pegasus stores better because it folds into a compact bundle, while the GEARWRENCH table needs floor space to roll into. If your garage doubles as a parking spot, that difference is the whole decision.

The Pegasus is built to pop open, fold down and travel. At 30 lb, it carries under one arm like a long toolbox.

That makes it easy to lean against a wall, slide onto a shelf or tuck into a corner between projects.

The GEARWRENCH table uses 3 inch casters instead of a fold. It moves easily around the shop, but it stays a table.

When the work is done, it rolls to a spot against the wall rather than disappearing.

Think about your worst storage day, not your tidiest. A folded Pegasus fits into gaps a rolling table can't use.

Our BORA Centipede vs WORX Pegasus comparison covers another folding option if storage is your top priority.

Does the Pegasus fold flat enough for a shelf?

The Pegasus folds into a compact unit that's easy to carry and stow, so a shelf or wall hook works well. The GEARWRENCH table doesn't fold, so it needs floor space when idle.

If your garage has a narrow walkway beside the car, the Pegasus keeps it clear.

Which table is more stable under real projects?

The Pegasus holds more weight and offers a wider working surface, so it's the sturdier base for cutting and assembly. Its 300 lb table rating and 1000 lb sawhorse rating leave room for lumber and power tools.

The GEARWRENCH table carries 125 pounds at the center of its tray and 65 pounds on the edges. That's plenty for tools, parts and light repairs.

Heavy boards or a benchtop tool call for the Pegasus.

The Pegasus also comes with 2 quick clamps rated to 301 lb of clamping force and 4 clamp dogs. You can hold a workpiece without hunting for separate clamps.

Its built-in measuring guide saves a step on cuts.

The GEARWRENCH table brings its own strengths. Its solid solvent resistant EVA mat shrugs off spills and chemical splashes.

The tray also has compartments that keep small parts from rolling around while you move the table.

Which top handles messy jobs better?

The EVA mat on the GEARWRENCH table resists solvents and wipes clean. The Pegasus top is molded ABS plastic with steel supports.

For painting and staining, either works, though the taller GEARWRENCH setting helps keep your work at a comfortable height.

Which table adjusts to the work you do?

The GEARWRENCH table adjusts from 35 to 48 inches, so you can match the height to the job, while the Pegasus stays at 32 inches. That range is the biggest practical difference between the two.

A 32 inch height suits seated work and most hand tools. For sanding, planing or assembly at eye level, the taller settings on the GEARWRENCH table reduce the hunching.

The adjustment runs from a low tray position up to a 48 inch top, and you can lock it at any height in between.

The Pegasus trades that flexibility for speed. It opens to a set 32 inch height and stays there.

If you mostly cut and clamp, a fixed height is fine. If you move between floor-level repairs and upright assembly, the adjustable table earns its keep.

The GEARWRENCH table also lets you roll a project across the shop without lifting it. At 20 x 30 inches, its tray handles small parts and tools in organized compartments.

The Pegasus surface is larger but doesn't move on its own.

Which table moves around the garage more easily?

The GEARWRENCH table wins on rolling mobility because its 3 inch casters let you push a loaded tray across the shop. The Pegasus wins on carrying mobility, since you can fold it and pick it up.

The casters are the key. You can load a tray with the tools for a job, roll it to the work area, and keep everything within reach.

That's handy for jobs spread across the garage or driveway.

The Pegasus doesn't roll. It's built to be carried and set down wherever you need support.

Between a truck bed and a workbench, folding and carrying beats rolling.

Consider how far you'll travel. A few steps across the garage favors the rolling table.

Loading into a truck or carrying up stairs favors the folding one. The WORX Pegasus vs Pony folding work table comparison looks at another portable option with its own travel quirks.

Can you move a loaded Pegasus?

The Pegasus carries easily when folded. When open and loaded with a project, it stays put.

Plan to move it empty and set it up where the work happens. The GEARWRENCH table lets you roll the work itself.

Which table suits small projects and repairs?

The GEARWRENCH table suits small repairs and tool organization, with its adjustable height and built-in compartments. It works well as a mobile workstation beside a car or a workbench.

The 125 pound center capacity covers most hand-tool jobs. Changing brake pads, assembling furniture or sorting hardware fits comfortably.

The EVA mat protects the tray from oil and solvents.

The adjustable height also helps with odd jobs. Set it low to reach a low engine bay or raise it to work on a tall shelf.

The casters let you take the tray to the job instead of clearing bench space.

The Pegasus works for small jobs too, with a wider top and more clamping options. It's the stronger pick for cutting and shaping, while the GEARWRENCH table is the better fit for repairs that move around.

Which table suits cutting and woodworking?

The Pegasus suits cutting and woodworking better, thanks to its 300 lb table rating, 1000 lb sawhorse rating and included clamps. It gives you a stable base for a circular saw or a hand plane.

The Pegasus converts from a workbench to a sawhorse. As a sawhorse, it supports up to 1000 pounds, enough for a heavy beam or a sheet of plywood.

The 2 quick clamps hold work down while you cut.

The built-in measuring guide removes a common delay. The 4 clamp dogs grip circular or oddly shaped pieces that a bar clamp can't hold.

For a garage workshop, that's a useful kit in one table.

The GEARWRENCH table isn't built for the same loads. Its edge capacity of 65 pounds is a reminder to keep heavy boards off it.

For light trimming and sanding, though, the adjustable height makes it comfortable.

Our WORX Pegasus review digs into how the clamps and sawhorse mode work in practice. If you want a folding option with a bit more room to spread out, the BORA Centipede review covers a larger folding surface.

Can the GEARWRENCH table hold a circular saw?

The GEARWRENCH table's 125 pound center rating can carry a circular saw, but its 20 x 30 inch tray is small for long boards. The Pegasus surface and clamps make it the better base for saw work.

Keep heavy cuts on the Pegasus and light trim on the GEARWRENCH table.

Which table costs more to set up and keep?

The Pegasus needs no assembly, so it's ready to work right away, while the GEARWRENCH table requires assembly before first use. The difference is time, not maintenance.

The GEARWRENCH table ships with assembly required and instructions included. You'll spend a session putting it together before you can roll it into the garage.

Once built, the casters and mat handle everyday use.

The Pegasus opens straight from the box. It folds and unfolds for each job, and its plastic top and steel supports wipe clean.

The clamps and dogs store on the table when not in use.

Neither table needs much care. Wipe spills, keep casters clear of grit and check the folding joints on the Pegasus now and then.

The GEARWRENCH mat cleans with a damp cloth.

Who should buy which table?

Buy the GEARWRENCH table if you want adjustable height and a mobile tray for repairs; buy the Pegasus if storage and clamping matter more. The folding question favors the Pegasus, but the height question favors the GEARWRENCH.

Choose the GEARWRENCH Adjustable Height Mobile Work Table 35 if you work at different heights and want your tools to roll with you. It suits a garage where the table has a spot to live and the jobs change often.

The BORA Centipede vs WORX Pegasus comparison is worth a read if you want a bigger folding surface for sheet goods.

Choose the WORX Pegasus WX051 if your garage is tight and your projects involve cutting and clamping. It folds away, carries easily and handles both bench and sawhorse duty.

The WORX Pegasus vs Pony comparison covers a rival folding table if you want to weigh one more option.

If you need a permanent workbench for heavy builds, neither folding table is the answer. These two suit temporary setups and flexible spaces.

Pick the one that matches your storage reality first.

Verdict: which folding work table should you buy?

The WORX Pegasus folds better, so it's the pick for most garages that need a table to disappear between projects. The GEARWRENCH table wins when adjustable height and rolling mobility matter more than a small folded footprint.

This GEARWRENCH work table vs WORX Pegasus matchup really comes down to one question. Will the table fold up and go away, or will it roll to a corner and stay?

The Pegasus folds into a compact 30 lb bundle, carries under one arm and converts to a sawhorse for cutting.

The GEARWRENCH table adjusts from 35 to 48 inches, rolls on casters and keeps small parts organized in its tray. It's the better workstation for repairs that move around the shop.

Neither table needs much upkeep, and both fit a garage that has to share space with a car.

If folding is your top priority, buy the Pegasus. If height flexibility and a mobile tray top your list, buy the GEARWRENCH table.

For a closer look at the Pegasus on its own, read our full WORX Pegasus review.

Frequently asked questions

Is the GEARWRENCH work table better than the WORX Pegasus for folding?

No. The WORX Pegasus folds into a compact bundle that fits under one arm, while the GEARWRENCH work table is a rolling tray table built for height adjustment and mobility.

For folding down small after every job, the Pegasus is the easier pick.

Can the WORX Pegasus replace a workbench and a sawhorse?

Yes. It converts between a workbench that supports up to 300 lb and a sawhorse rated to 1000 lb.

The included 2 quick clamps and 4 clamp dogs add holding power for cutting and shaping work, so one table covers both jobs.

How much weight can the GEARWRENCH work table hold?

The GEARWRENCH table holds up to 125 pounds at the center of its 20 x 30 inch tray and 65 pounds on the edges. That suits tools, parts and light assembly, but it isn't built for lumber stacks or heavy machinery.

Which table folds smaller, the GEARWRENCH work table or the WORX Pegasus?

The WORX Pegasus folds into a compact unit you can carry under one arm. The GEARWRENCH mobile work table rolls on casters rather than folding down flat.

If your garage has no floor space to spare, the Pegasus stores out of the way more easily.

Do these folding work tables need assembly?

The GEARWRENCH table arrives with assembly required and instructions included. The WORX Pegasus opens and closes without assembly, so you can use it straight out of the box and fold it away between projects.